Storing; Maintenance - Shark NV350WC Owner's Manual

Storing

Lower
Cord
Storage
Clip
Fig. 16
STORE YOUR VACUUM SAFELY
1
Convert your vacuum back to upright vac mode.
2 Rotate the upper quick cord release to its upright
position and coil the power cord loosely around
the two clips. Clip the plug onto the cord to secure.
(Fig. 16)
3 Store the dusting brush and the crevice tool on the
mounts on the accessory holder.
4
Store your vacuum cleaner safely in a cool dry area
where it will not be a hazard, will not get damaged
and will not cause damage to anyone or anything.
N OTE: Empty dust cup after cleaning and prior
to storing. (See "Maintenance" section for
instructions.)
12 TOLL FREE: 1-800-418-0934
NV350WC_26_IM_ENG_FRE_101117.indd 12

Maintenance

Quick
Cord
Release
Fig. 17
To reduce the risk of electric shock, unplug the unit
before performing any cleaning, maintenance, or
troubleshooting checks.
Reassemble all parts securely before operating
vacuum.
D O NOT operate the vacuum without the pre-
motor filters and dust cup in place.
D O NOT operate the vacuum with WET filters.
I MPORTANT: Make sure all filters are completely
dry before inserting back into vacuum.
W ARNING: Never insert sharp objects into any
opening to clear an obstruction.
I MPORTANT: Damages caused while clearing
or attempting to clear blockages are not covered
under your product's limited warranty.
Fig. 18
10-11-17 3:21 PM