Display Panel - HP 17-P series Maintenance And Service Manual

Display panel

Component
Display bezel (includes screw covers)
Hinges (left and right, includes screw covers)
Raw display panel (16:9 Ultra Wide Aspect Ratio [43.9-cm 17.3-in]; includes screw covers)
Antennas (includes wireless antenna cables and transceivers; includes screw covers)
Webcam/microphone module
Display cable SXGA (includes screw covers)
Display enclosure:
Before removing the display panel, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the top cover from the base enclosure (see
Remove the display panel:
1. Open the computer.
2. Disengage the display cable (1) and disconnect the display connector (2) on the left side base of the
display panel.
34 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 26).
Optical drive on page 27).
Base enclosure on page 30).
Spare part number
809982-001
763706-001
810319-001
763691-001
809989-001
765785-001
809980-001