Memory Modules - HP 17-P series Maintenance And Service Manual

Remove the speakers:
1. Turn the computer, with the front edge toward you.
2. Remove two screws (1).
3. Disengage the cables, and then remove the front speakers (2).
Reverse this procedure to install the speakers.

Memory modules

Description
2 GB memory module
4 GB memory module
8 GB memory module
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the top cover from the base enclosure (see
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 26),
Optical drive on page 27).
Base enclosure on page 30).
Spare part number
691739-005
691740-005
693374-005