HP 17-P series Maintenance And Service Manual page 59

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
Remove the system board:
1. Remove the following cables if you have not already done so:
●
Power connector board cable (1)
●
Display cables (2), and (3)
●
Speaker cable (4)
2. Disconnect the following cables if you have not already done so:
●
Optical drive cable (1)
●
Hard drive cable (2)
●
USB connector cable (3)
Battery on page 26),
Optical drive on page
WLAN module on page
27).
Base enclosure on page
42).
Component replacement procedures
30).
51