Functions Of The Ch1, Ch2; Buttons; Functions In Lock Mode; Functions In Setup Mode - AKG DMS800 User Instructions

controls on the receiver
CH1, CH2

buttons

BACK‑Taste
DSP button
DMS800 MANUAL
AUDIO menu
REHEARSAL menu
9.2 Functions of the CH1, CH2 (10, 12) buttons
9.2.1

Functions in LOCK mode

In the main window
9.2.2

Functions in SETUP mode

In the main window
9.3

Functions of the BACK button (4)

Tap
Long press
9.4

Functions of the DSP button (2)

The factory settings of the DSP button can be found in section "16.1 DSP
profiles: Factory settings" on page 114.
In the main window
In the AUDIO submenu
Select the receiver channel CH1 or
CH2 in the submenus GAIN, DSP and
ATTENUATION PAD.
Scroll through the HF level
Channel window for parameter overview, no
changes possible
Channel window for parameter setting, no
changes possible
Close current menu
All unconfirmed values are deleted
Close all menus
All unconfirmed values are deleted
The main window is displayed
Deactivate the LOW CUT, EQ, COMPRESSOR
and LIMITER functions for the corresponding
channel
Set the parameters of the digital signal
processor
89