Operating Notes; Select Control (5); Ch1 / Ch2 Buttons (10 / 12); Back Button (4) - AKG DMS 700 User Instructions

Hide thumbs Also See for DMS 700:
Table of Contents

Advertisement

Available languages

Available languages

DMS
700

SELECT Control (5)

LOCK Mode:
SETUP Mode:
CH1 / CH2 Buttons
(10 / 12)
LOCK Mode:
SETUP Mode:

BACK Button (4)

DSP Button (2)

Checking the Audio
Signal – Headphones CH1
and CH2 Buttons (6)
10

5 Operating Notes

Controls the various operating parameters of the receiver.
The SELECT control has the following functions:
• Long push: Unlocks receiver (switches to SETUP mode).
• Short push: Confirms status and warning messages.
• Turn left or right: No function.
• Long push: Locks the receiver (switches to LOCK Mode).
• Short push: Calls up the selected menu or confirms a selected setting.
• Turn left or right: Select menus or change the selected setting.
Depending on the current menu the channel keys have different functions.
• General View: Call up the channel information window.
• General View: Call up the channel information window.
• Quick Setup Menu: From the CHANNEL LIST, you can directly select and synchronize any open
channel.
• Channel Menu: You can directly open a sub-menu (Frequency, Group/Channel, Name...) with
the desired channel. The channel sub-menu lets you select a different channel.
• Audio Menu: From the GAIN, DSP, and ATTENUATION PAD sub-menus, CH1 and CH2 let you se-
lect receiver channel CH1 or CH 2.
• Rehearsal Menu: Select the displayed graph.
A short push will close the current menu and all unconfirmed values are erased.
Holding the BACK key will close all menus, all unconfirmed values are erased and the general win-
dow is activated.
The DSP button allows you to bypass the LOW CUT, EQ, COMPRESSOR, and LIMITER for each chan-
nel individually.
1. To monitor the audio signal, connect headphones with a ¼"/6.3mm TRS plug to the headphones
output (7).
2. To activate the audio output, push the headphones CH1 or CH2 button next to the headphones
socket briefly.
3. To deactivate the audio push the headphones CH1 or CH2 button for more than 1 second.
• You can adjust the headphone volume with the SELECT control directly after pushing the head-
phones section CH1 or CH2 button.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr 700Dpt 700Dht 700 d5Dht 700 c5

Table of Contents