Kärcher BR/BD 530 XL BAT Manual page 27

English
Setting the water flow rate
! Set the water flow rate with the control
knob according to the dirt on the floor
covering.
Information:
i
Start cleaning on a low water flow
rate. Gradually increase the water flow rate
until the desired cleaning result is obtained.
Lowering the suction bar
! Press down the lever; the suction bar is
lowered.
! Switch on the suction motor with the
switch.
Information:
i
The suction bar automatically adapts
itself to the floor conditions and does not
require any special adjustment.
To improve the vacuuming result, the
suction bar can be rotated or tilted.
Operating Instructions BR/BD 530/530 XL/F BAT/Package
Switching on the brush head
do not operate the unit on the spot.
! Actuate the trigger lever, the brush
motor starts.
Stopping and switching off
the unit
! Close control knob for water flow rate.
! Move the unit forwards another 1–2 m to
extract any remaining water.
! Switch off the brush mode switch and
suction motor.
! Raise the suction bar.
! Swivel down the running gear and lock.
brushes or the brush rollers must be
unloaded (risk of deforming the brushes).
Caution!
To prevent damage to the floor,
Caution!
When work is complete, the disc
27