Table of Contents
Advertisement
TA-S9D
QQ
3 7 63 1515 0
Note: Use following buttons in the test mode.
no mark : Button of amplifier unit (TA-S9D)
*1
: Button of tuner unit (ST-S9)
*2
: Button of DVD/video CD/CD player unit (DVP-S9)
[MC Test Mode]
Enter the MC Test Mode
1. Press the
I/1
button to turn the power on.
[STEREO/MONO]
2. While pressing the both
STUDIO C]
buttons, press the
3. "GROOVE" indication blinks on the fluorescent indicator tube
in the midst of MC test mode.
4. This mode has two modes (mode 1/mode 2).
5. To change the modes, press three buttons in the same manner
as entering this mode (step 2). Each time the step 2 operation
is repeated, it changes modes alternately.
6. To distinguish the mode, turn the
or counterclockwise. Then display is shown as follows.
Mode 1: only "MIN" or "MAX"
Mode 2: "MIN", "1 to 30" or "MAX"
AMP Test Mode
In the AMP test mode, it operates as follows.
[VOLUME]
•
knob is turned, it changes display as follows.
Counterclockwise : VOLUME MIN
Clockwise
: VOLUME MAX
[FILE SELECT]
•
knob is turned, it changes speaker output mode
as follows.
Display of each mode:
Mode No.
Display
TE
L 13942296513
1
L: L
2
L: SL
3
L: LSLC
4
L: LSLC
5
L: C
Details of each mode:
Mode 1 : L-CH : front L-CH
R-CH : front R-CH
Mode 2 : L-CH : rear L-CH
R-CH : rear R-CH
Mode 3 : L-CH : front L-CH, rear L-CH, center
R-CH : front R-CH, rear R-CH, sub woofer
(no LFE, "EQ" indication does not light up on the fluorescent
indicator tube of tuner unit)
Mode 4 : L-CH : front L-CH, rear L-CH, center
R-CH : front R-CH, rear R-CH, sub woofer
(LFE on, "EQ" indication lights up on the fluorescent indica-
tor tube of tuner unit)
Mode 5 : L-CH : center
R-CH : sub woofer
Releasing the MC Test Mode
To release from this mode, press the
power cord.
www
.
8
http://www.xiaoyu163.com
SECTION 4
TEST MODE
[CINEMA
1
*
and
[CINEMA STUDIO A]
button.
[VOLUME]
knob clockwise
R: R
R: SR
R: RSRW
R: RSRW
R: W
button or disconnect the
I/1
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
[GC Test Mode]
Enter the GC Test Mode
Procedure 1:
1. Press the
button to turn the power on.
I/1
[STEREO/MONO]
2. While pressing the both
STUDIO C]
buttons, press the
3. LEDs and fluorescent indicator tube are all turned on of all
units.
Procedure 2:
1. Press the
button to turn the power on.
I/1
[PLAY MODE]
2. While pressing the both
press the
(DISC 1) *
2
Z
3. LEDs and fluorescent indicator tube are all turned on of all
units.
Version Display Mode
Procedure:
1. Enter the GC test mode.
[TUNER MEMORY]
2. Each time the
pressed, microcomputer or mechanism deck version is dis-
played of each unit.
[TUNING +]
1
3. Press the
*
displayed the version.
Key Check Mode
Procedure:
1. Enter the GC test mode.
[TUNING --]
1
2. Press the
*
check mode.
Q Q
3
6 7
1 3
1 5
3. In the key check mode, the fluorescent indicator tube displays
"K 0 J 0 V 0". Each time a button is pressed, "K" value in-
creases. However, once a button is pressed, it is no longer taken
into account.
"J" value increases like 1, 2, 3 ... if turn the
knob clockwise, or it decreases like 0, 9, 8 ... if turn the JOG
dial counterclockwise.
"V" value increases like 1, 2, 3 ... if turn the
clockwise, or it decreases like 0, 9, 8 ... if turn the JOG dial
counterclockwise.
Releasing the GC Test Mode
To release from this mode, press three buttons in the same manner
as entering this mode or disconnect the power cord.
co
.
9 4
2 8
[CINEMA
*
1
and
[CLOCK/TIMER]
1
*
button.
*
2
and
*
2
buttons,
x
button.
[DISC 1]
1
2
*
or
*
button is
[DISC 3]
2
or
*
button to detail is
[DISC 2]
2
or
*
button to set the key
0 5
8
2 9
9 4
2 8
[FILE SELECT]
[VOLUME]
knob
m
9 9
9 9
Advertisement
Table of Contents
