Polaris UTV Series 10 2x4 Owner's Manual page 85

MAINTENANCE AND LUBRICATION
Brakes
Parking Brake Inspection
1. Slowly push the parking brake
down with your foot.
2. After 8 to 12 clicks of lever
travel, check the vehicle for
movement. The vehicle should
not roll while parked. If the
vehicle moves, adjustment is
necessary
Parking Brake Adjustment
1. Place the vehicle in neutral on a
flat level surface.
2. Carefully lift the rear of the vehicle off the ground and stabilize on
jack stands.
3. Loosen the locknut on the rear caliper adjustment bolt.
4. Tighten the adjustment bolt until the rear tire will not rotate.
5. Back the adjustment bolt out 1/4 turn.
6. Tighten the jam nut while holding the adjustment nut in place.
7. Repeat this procedure on the other rear tire.
1
83