Periodic Maintenance Schedule - Polaris UTV Series 10 2x4 Owner's Manual

MAINTENANCE AND LUBRICATION

Periodic Maintenance Schedule

Item
Tail lamp
Air Filter - Main Ele-
"
ment
L
" Transmission Oil
Battery
J Brake pad wear
Engine breather filter
"
L
" General Lubrication
Engine Cylinder
Head/Cylinder Base
Fasteners
" Engine Oil - Level
Engine Oil - Change
"
(4-Cycle)
L
Oil Filter
"
L
L Engine breather
hose
J Carburetor Float
Bowl
J Throttle Cable
L Choke (Enricher)
Cable
Shift linkage
J Drive belt
" More often under severe use, such as dirty or wet conditions
L Emission Control System Service (California - 4-Cycle)
Frequency Remarks
Daily Check daily; apply Polaris dielectric
grease to socket when replaced
Weekly Inspect; replace if necessary
25 hrs Check level; change oil annually
25 hrs Check terminals; clean; check fluid
level
25 hrs Inspect periodically
25 hrs Inspect, replace annually and as
needed
25 hrs Lubricate all fittings, pivots, cables,
etc.
25 hrs Re-torque required at first service
only
25 hrs Check level daily; break-in service
at 25 hours.
100 hrs Change oil at 100 hours, more often
in cold weather use.
100 hrs Replace with oil change
100 hrs Inspect
50 hrs Drain bowl periodically and prior to
storage
50 hrs Inspect; adjust, lubricate, replace if
necessary
50 hrs Inspect; adjust, lubricate, replace if
necessary
50 hrs Inspect; adjust
50 hrs Inspect; adjust, replace if necessary
57