Polaris UTV Series 10 2x4 Owner's Manual page 87

MAINTENANCE AND LUBRICATION
Seat Belts
Inspect all three seat belts for proper operation before each use of the
vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it's
securely latched.
2. Push the red button in the middle of the buckle to make sure it
releases freely.
3. Check the belt webbing for wear, cuts or damage. If any
irregularities are found, have the seat belt system checked and/or
replaced by an authorized Polaris dealer.
The UTV seat belt is adjustable
and should be adjusted for both
the operator and passenger
before driving. Although
having the belt at 30° is typical
for many people, it will not
accommodate all body sizes
and shapes. Make sure the
seat belt is adjusted to the
lowest possible lap position
before riding.
1. To adjust, loosen the bolts
(1).
2. Reposition both the buckle
and retractor. Tighten
bolts.
NOTE: The center belt does not self adjust. Before riding, pull on the
strap to secure the belt on the lap of the center passenger.
Riding as a passenger in this vehicle is not safe for anyone under
the age of five. Do not allow anyone under five to ride as a
passenger. Serious injury or death could result.
WARNING
1
85