Status (Optional); Assembly; The Status Unit Has Three Functions - Riello RL 190 Installation, Use And Maintenance Instructions

9

STATUS (optional)

Accessory available on request. See pag. 5.
9.1

Assembly

4
D3057
9.2

The STATUS unit has three functions:

1 Burner operating hours and the number of firings are
shown on display V
Total operating hours
Press button "h1".
2nd stage operating hours
Press button "h2".
1st stage operating hours (calculated)
Total hours - 2nd stage operating hours
Number of firings
Press button "count".
Resetting operating hours and number of firings
Press the three "reset" buttons simultaneously.
Non-volatile memory
The operating hours and the number of firings will remain in the
memory even in the case of electrical power failures.
6074
STATUS (optional)
Assembly
1
2
The burners are preset to accept the Status. To assemble, pro-
ceed as follows:
– Connect Status 1) using connector 2) fitted on the bracket 3).
– Fasten Status to the bracket using the screws 4) supplied with
the kit.
1 Status
2 Connector
3 Bracket of the burner
4 Fixing screws
3
Fig. 28
26 GB