Mounting The Bar Speaker And The Surround Speakers On A Wall - Sony HT-RT5 Operating Instructions Manual

7
Press BACK.
The system returns to the previous
display.
Press / to select [Test Tone], then
8
press .
Press / to select [Off], then press
9
.
Notes
• The test tone signals are not output from
the HDMI OUT (ARC) jack.
• If no sound is output from the subwoofer,
please check whether the subwoofer
volume is not VOL 0.
40
GB
Mounting the Bar Speaker
and the Surround
Speakers on a Wall
You can mount the Bar Speaker and
surround speakers on a wall.
Notes
• Prepare screws (not supplied) that are
suitable for the wall material and strength.
As a plasterboard wall is especially fragile,
attach the screws securely in the wall
beam. Install the speakers horizontally,
hung by screws in studs in a continuous flat
section of the wall.
• Have the installation done by a Sony dealer
or licensed contractor and pay special
attention to safety during the installation.
• Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
disaster, etc.
1
Fix the supplied wall mounting
brackets to the bracket fixing holes
on the bottom of the Bar Speaker
with the supplied screws so that the
surface of each wall mounting
bracket is as shown in the
illustration.
Fix the two wall mounting brackets to
the left and right fixing holes on the
bottom of the Bar Speaker.