Remote Control - Sony HT-RT5 Operating Instructions Manual

select [New connection registration]
from the network list, then select
[Manual registration] to input a
network name (SSID) manually.
Wireless sound (Subwoofer/
Surround speakers)
No sound is heard from the subwoofer/
surround speakers.
 Make sure the AC power cord (mains
lead) of the subwoofer/surround
speakers is connected properly (refer
to the supplied Startup Guide).
 The on/standby indicator on the
subwoofer/surround speakers does
not light.
– Make sure the AC power cord
(mains lead) of the subwoofer/
surround speakers is connected
properly.
– Press  (on/standby) of the
subwoofer/surround speakers to
turn on the power.
 The on/standby indicator on the
subwoofer/surround speakers
flashes slowly in green or lights in red.
– Move the subwoofer/surround
speakers to a location near the Bar
Speaker so that the on/standby
indicator on the subwoofer/
surround speakers lights in green.
– Follow the steps in "Further
Setting for the Wireless System
(Subwoofer/Surround speakers)"
(page 36).
– Check the connection status of the
wireless sound system (page 36).
 The on/standby indicator on the
subwoofer/surround speakers
flashes quickly in green.
– Consult your nearest Sony dealer.
 The on/standby indicator on the
subwoofer/surround speakers
flashes in red.
– Press  (on/standby) of the
subwoofer/surround speakers to
turn off the power and check
50
GB
whether the ventilation opening
of the subwoofer/surround
speakers is blocked or not.
 The subwoofer is designed for
playback of bass sound. When the
input source does not contain much
of bass sound, as is the case with
most TV programs, the bass sound
may not be audible.

 Press SW
+ on the remote control
to increase the volume of the
subwoofer (page 57).
Sound skips or has noise.
 If there is a device nearby that
generates electromagnetic waves,
such as a wireless LAN or a
microwave oven in use, locate the
system apart from it.
 If there is an obstacle between the
Bar Speaker and the subwoofer/
surround speakers, move or remove
it.
 Locate the Bar Speaker and the
subwoofer/surround speakers as
close as possible.
 Switch the wireless LAN frequency of
any nearby Wi-Fi router or PC to
2.4 GHz range.
 Switch the network connection of the
TV or Blu-ray Disc Player from
wireless to wired.

Remote control

The remote control of this system does
not function.
 Point the remote control at the
remote control sensor on the Bar
Speaker (page 53).
 Remove any obstacles in the path
between the remote control and the
system.
 Replace both batteries in the remote
control with new ones, if they are
weak.
 Make sure you are pressing the
correct button on the remote control.