Sony HT-RT5 Operating Instructions Manual page 51

TV remote control does not work.
 This problem might be solved by
enabling the IR repeater function
(page 35).
Others
The Control for HDMI function does not
work properly.
 Check the HDMI connection (refer to
the supplied Startup Guide).
 Set up the Control for HDMI function
on the TV. Refer to the operating
instructions supplied with the TV
regarding how to set the TV.
 Make sure that any device connected
is compatible with "BRAVIA" Sync.
 Check the Control for HDMI settings
on the connected device. Refer to the
operating instructions supplied with
the connected device.
 If you connect/disconnect the AC
power cord (mains lead), wait more
than 15 seconds before operating the
system.
 If you connect the audio output of
video device with the system using a
cable other than an HDMI cable, no
sound may be output because of
"BRAVIA" Sync. In such a case, set
[Control for HDMI] to [Off] (page 25)
or connect the cable from the audio
output jack of the video device
directly to the TV.
 The type and number of devices that
can be controlled by the "BRAVIA"
Sync feature is restricted by HDMI CEC
standard as follows:
– Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up
to 3 devices
– Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to
3 devices (including this system)
– Tuner-related devices: up to
4 devices
– Audio system (receiver/
headphone): up to 1 device
(including this system)
"PRTCT," "PUSH" and "POWER" flash
alternately in the front panel display.
 Press  (on/standby) to turn off the
system. After the indicator
disappears, disconnect the AC power
cord (mains lead) and make sure
nothing is obstructing the ventilation
holes of the system.
Sensors of the TV do not work properly.
 The Bar Speaker may block some
sensors (such as the brightness
sensor), the remote control receiver
of your TV, the emitter for 3D glasses
(infrared transmission) of a 3D TV that
supports the infrared 3D glass
system, or wireless communication.
Move the Bar Speaker away from the
TV within a range that allow those
parts to operate properly. For the
locations of the sensors and remote
control receiver, refer to the
operating instructions supplied with
the TV.
Buttons of the Bar Speaker do not
operate.
 Cancel the child lock setting
(page 34).
Reset
If the system still does not operate
properly, reset the system as follows:
1
Press  (on/standby) to turn the
system on.
2
Press HOME.
The home menu appears on the TV
screen.
3
Select [Setup] -
from the home menu (page 27).
4
Select [Reset to Factory Default
Settings].
5
Select the menu item you want to
reset.
[Resetting]
51
GB