Installing The System; Mounting The Bar Speaker And The Surround Speakers On A Wall - Sony HT-RT4 Operating Instructions Manual

Hide thumbs Also See for HT-RT4:
Table of Contents

Advertisement

 / (previous/next/
rewind/fast forward)
Press to select the previous/next
track or file.
Hold down to search backward or
forward.
* The  + and  buttons have a tactile
dot. Use it as a guide during operation.
10
GB

Installing the system

Basic connections and
preparation
Refer to Startup Guide (separate
document).
Mounting the Bar
Speaker and the
Surround Speakers on a
wall
You can mount the Bar Speaker and the
Surround Speakers on a wall.
Note
Prepare screws (not supplied) that are
suitable for the wall material and
strength. As a plasterboard wall is
especially fragile, attach the screws
securely in the wall beam. Install the
speakers on a vertical and flat wall where
reinforcement is applied.
Be sure to subcontract the installation to
Sony dealers or licensed contractors and
pay special attention to safety during the
installation.
Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-rt40

Table of Contents