Sony HT-RTZ7 Settings Manual

4-684-822-11(1)
HT-RTZ7
Setting Guide
Each of the three boxes contains the following products.
ˎ HT-CT790 Sound Bar
ˎ SRS-ZR5 Personal Audio System
SRS-ZR5
HT-CT790
SRS-ZR5
This document describes the setup for use with the two products.
For more information, refer to the manuals included in the box of each product.
1
Locating the installation position
Bar Speaker
Subwoofer
HT-CT790
Rear
speaker
SRS-ZR5
Note
• Do not place magnetic cards on the system or near the system.
• Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
About the operation method of the system
Connect the Bar Speaker and the TV with the HDMI cable (not supplied) to display the operation
screen of the system on the TV. Prepare the HDMI cable.
Setting up the remote control of HT-CT790
To mount the Bar Speaker on a wall
Refer to "Mounting the Unit on a Wall" in the Operating Instructions of
HT-CT790 (separate document).
Rear
speaker
SRS-ZR5
2
Connecting with a TV
Is the HDMI input jack on your TV labeled "ARC" ?
YES
HDMI cable (not supplied)*
* To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to "Supported Input Video Formats" in the Operating Instructions of HT-CT790 (separate
document).
Note
• Make sure that the HDMI cable is firmly inserted.
3
Connecting with other devices
 Disconnect the HDMI cable from the HDMI IN jack of the TV, then reconnect it to any of the HDMI IN jacks (HDMI IN 1/2/3) on the Bar Speaker.
To enjoy the high quality surround sound of Dolby TrueHD, DTS HD, etc., switch the connection of the Blu-ray Disc™ player, cable box, satellite box, etc. to the system.
* To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to "Supported Input Video Formats" in the Operating Instructions of HT-CT790 (separate
document).
Tip
• The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.
Set the settings as follows; Press HOME - [Setup] - [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].
• To enjoy copy right-protected 4K content, refer to "Connection for Viewing Copyright-protected 4K Content" in the Operating Instructions of HT-CT790 (separate document).
Note
• Make sure that the HDMI cable is firmly inserted.
NO
Optical digital cable
(supplied)
HDMI cable (not supplied)*
HDMI cable (not supplied)*
Blu-ray Disc™ player, cable
box or satellite box, etc.
Continued on back page
© 2016 Sony Corporation Printed in the Czech Republic