Fcoe Configuration - Dell QMD8262-k User Manual

5–Boot Configuration
Dell System Setup

FCoE Configuration

The FCoE Configuration page (see
 Connect: Select Enabled to enable OS boot from an FCoE storage device,
or Disabled to disable OS boot from an FCoE storage device.
Boot from LUN: The boot device LUN. This is a 16-bit value. This

parameter is selectable only if the Boot parameter is set to Enabled.
 Boot from Target: The boot device worldwide port name. This is a 64-bit
value. This parameter is selectable only if the Boot parameter is set to
Enabled.
Figure 5-12. FCoE Configuration
192
Figure 5-12) lets you set the following:
CU0354602-00 L