Dell QMD8262-k User Manual page 113

3–Adapter Management Applications
Windows Management Applications
To run user diagnostics in the CLI:
Use QConvergeConsole CLI (qaucli), a unified command line utility, to manage all
QLogic adapter models, including running user diagnostics.
The overall option (-pr <protocol>) allows you to start the utility with a specific
protocol type, either NIC, iSCSI, or Fibre Channel. If you do not specify a protocol,
all protocols are enabled by default.
QConvergeConsole commands for selecting a protocol.
qaucli
qaucli -pr nic [options]
qaucli -pr iscsi [options]
qaucli -pr fc [options]
qaucli -npar [options]
qaucli -nic [options]
netscli [options]
qaucli -iscsi [options]
iscli [options]
qaucli -fc [options]
scli [options]
Diagnostic help commands, and command options available for each specific
protocol, are available by specifying -h to the protocol, as shown in
-h
qaucli -pr nic -h
Table 3-3. Selecting a Protocol in Menu Mode
Command
Table 3-4. Selecting a Protocol in Legacy Mode
Command
Table 3-5. Getting Help
Command
Print usage of a specific adapter type and then exit
Print NIC protocol usage and then exit
Table 3-3 and Table 3-4
Description
Start QConvergeConsole CLI in interactive mode
Issue NIC command line options
Issue iSCSI command line options
Issue Fibre Channel and FCoE command line options
Issue NIC partitioning (NPAR) (Switch Independent
Partitioning) command line options
Use NIC legacy command line
Use NIC legacy command line
Use iSCSI legacy command line
Use iSCSI legacy command line
Use Fibre Channel legacy command line
Use Fibre Channel legacy command line
Description
98
list the
Description
Table 3-5.
CU0354602-00 L