Section 3 - Configuration
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local Hard
You may save and document your current settings into
Drive:
your computer.
Local From Local
Locate a pre-saved configuration by clicking Browse and
Hard Drive:
then restore the pre-defined settings to your camera by
clicking Load Configuration.
Restore to Factory
You may reset your camera and restore the factory
Default:
settings by clicking Restore Factory Defaults.
Reboot Device:
This will restart your camera.
D-Link DCS-6815/6817/6818 User Manual
Backup and Restore
52