Backup And Restore - D-Link DCS-3112 User Manual

Configuration
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local Hard Drive:
Local From Local Hard Drive:
Restore to Factory Default:
Reboot Device:
D-Link DCS-3112 User Manual

Backup and Restore

You may save and document your current
settings into your computer.
Locate a pre-saved configuration by clicking
Browse and then restore the pre-defined
settings to your camera by clicking Load
Configuration.
You may reset your camera and restore the
factory settings by clicking Restore Factory
Defaults.
This will restart your camera.
50