Brother DCP-1608 User Manual page 52

Chapter 1
1.General Setup (continued)
Level 2 Level 3
—
4.Replace
Toner
5.Reset 1.Machine
Reset
2.Network
3.All
Settings
—
0.Local
Language
The factory settings are shown in Bold with an asterisk.
1
For DCP-1618W only
2
For DCP-1608 and DCP-1619, this menu is 1.All Settings.
44
Descriptions 1
Sets the machine to
continue or stop
printing after the LCD
shows Replace
Toner.
Restores all the
function settings to
1
factory default.
1 Restores all network
settings to the factory
default.
Restores all the
machine settings to
2
factory default.
Restores all the
function settings to
factory default.
Allows you to change
the LCD language.
Options Descriptions 2
The machine will
Continue
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner Ended.
The machine will stop
Stop*
printing. Replace the
toner cartridge with a
new one.
a Reset
Cancel restore and
b Exit
exit the menu.
a Reset
Cancel restore and
b Exit
exit the menu.
a Reset
Cancel restore and
b Exit
exit the menu.
*
English
Page
53