Brother DCP-1608 User Manual page 33

2.Fax (For MFC-1919NW) (continued)
Level 2 Level 3
1.Setup 4.Auto
Receive Reduction
(In FAX mode
only)
(Continued)
5.Memory
Receive
6.Print
Density
The factory settings are shown in Bold with an asterisk.
Descriptions 1 Options
The machine
On*
calculates the
reduction ratio by
using the page size of
the fax and your
Paper Size setting
(Menu, 1, 2, 2).
Off
Automatically stores
On*
any incoming faxes in
its memory if it runs
out of paper.
The machine will
carry on receiving the
current fax, with the
remaining pages
being stored in
memory, if enough
memory is available.
Off
You can adjust the
-nnnno+
Print Density setting
-nnnon+
to make your printed
pages darker or
-nnonn+*
lighter.
-nonnn+
-onnnn+
General information
Descriptions 2 Page
If you choose On, the
machine
automatically
reduces each page of
an incoming fax to fit
on one page of A4,
Letter, Legal, or Folio
size paper.
Further incoming
faxes will also be
stored into memory
until the memory is
full. When the
memory is full the
machine will stop
automatically
answering calls. To
print the faxes, put
fresh paper in the tray
and press Start.
Further incoming
faxes will not be
stored in memory.
The machine will
then stop
automatically
answering calls until
fresh paper is put in
the paper tray. To
print the last fax you
received, put fresh
paper in the tray and
press Start.
Press c to make
darker, press d to
make lighter.
1
25