2.Fax (For MFC-1919NW) (continued)
Level 2
Level 3
3.Anti-Junk
1.Register
Fax
2.Delete
3.Print
Report
4.Address
1.Speed Dial
Book
5.Report
1.Transmission
Setting
The factory settings are shown in Bold with an asterisk.
Descriptions 1
Options
If you do not want to
—
receive a fax/call
from specific
numbers, you can
register the numbers
up to 100 to the Anti-
Junk Fax list.
—
You need to apply for
the Caller ID service
at your local
telephone company.
You can not choose
—
the numbers that is
not stored in the
Caller ID memory.
Stores up to 99
—
Speed Dial numbers.
Press
(Address
Book) twice and
enter the two digit
Speed Dial number.
You can use the
On
Transmission
Verification Report as
On+Image
proof that you sent a
fax. This lists the
receiving party's
name or fax number,
the time and date of
transmission,
Off*
duration of
transmission,
number of pages
sent, and whether or
Off+Image
not the transmission
was successful.
No Report
General information
Descriptions 2
Page
Choose the number
you want to register
to the Anti-Junk Fax
list by pressing a and
b . Press OK and
then press 1.
Choose the number
you want to delete
from the Anti-Junk
Fax list by pressing a
and b . Press OK and
then press 1.
You can print a list of
registered
fax/telephone
numbers in the Anti-
Junk Fax list.
Prints a report after
every fax you send.
Prints a report after
every fax you send. A
portion of the fax's
first page appears on
the report.
Prints a report if your
fax is unsuccessful
due to a transmission
error.
Prints a report if your
fax is unsuccessful
due to a transmission
error. A portion of the
fax's first page
appears on the
report.
1
27