Brother DCP-1608 User Manual page 28

Chapter 1
2.Fax (For MFC-1906 and MFC-1908) (continued)
Level 2 Level 3
2.Setup Send 2.Fax
Resolution
(Continued)
3.Overseas
Mode
3.Anti-Junk 1.Register
Fax
2.Delete
3.Print
Report
The factory settings are shown in Bold with an asterisk.
20
Descriptions 1 Options
Sets the default
Standard*
resolution for
outgoing faxes.
Fine
The quality of an
outgoing fax can be
improved by
changing the Fax
S.Fine
Resolution.
Photo
If you are having
On
difficulty sending a
fax overseas due to a
bad connection, then
turning on Overseas
Mode may help.
Off*
If you do not want to —
receive a fax/call
from the specific
numbers, you can
register the numbers
up to 100 to the Anti-
Junk Fax list.
—
You need to apply for
the Caller ID service
at your local
telephone company.
You can not choose
—
the numbers that is
not stored in the
Caller ID memory.
Descriptions 2 Page
Suitable for most
typed documents.
Good for small print
and transmits a little
slower than Standard
resolution.
Good for small print
or artwork and
transmits slower than
Fine resolution.
Use when the
document has
varying shades of
grey or is a
photograph. This has
the slowest
transmission time.
Turn this feature on if
you are having
difficulties sending
faxes overseas. This
feature will stay on for
the next fax only.
Keep this setting Off
when the network
connection is good
and you can send an
overseas fax
sucessfully.
Choose the number
you want to register
to the Anti-Junk Fax
list by pressing a and
b . Press OK and
then press 1.
Choose the number
you want to delete
from the Anti-Junk
Fax list by pressing a
and b . Press OK and
then press 1.
You can print a list of
registered
fax/telephone
numbers in the Anti-
Junk Fax list.