User Controls; User Interfaces; Audible Alarm Button; Display - Inogen One G3 User Manual

User Controls

ON / OFF Button
Press once to turn "ON"; Press and hold for one second to turn "OFF".

Audible Alarm Button

Pressing this button will toggle the Inogen One® G3's breath detection
audible alert on and off.
Breath Detection Alert Mode. The Inogen One® G3 will alert with
audible and visual signals for "no breath detected" when this mode
is enabled and no breath has been detected for 60 seconds.
At 60 seconds, the device will enter into auto pulse mode and once
another breath is detected, the device will exit auto pulse mode and
deliver normally on inspiration. The display's mode indication area will
show a bell icon, flashing red light and display message when the
alert is enabled.
If power is lost, the breath detection audible alert remains set in the
user preferred mode.
Flow Setting Control Buttons
Use the – or + flow setting control buttons to select the setting
as shown on the display. There are five settings, from 1 to 5.
Display Backlight Button
Push on; automatically turns off after 15 seconds.

User Interfaces

Display

This screen displays information regarding flow setting, power
status, battery life and errors. If you would like to change the
language on the Inogen LCD Screen contact your
Equipment Provider for instructions.
4