Inogen One G3 Manual

Column change guide

Hide thumbs Also See for One G3:

Enlarged version

Press and hold the light button for 10 seconds

and screen will display "sieve reset". Release

button once message is displayed on screen.

Press the bell button once and screen will display

"sieve reset successful". Press the power

button to turn on the Inogen One® G3,

and use normally.

Your Equipment Provider:

Your Physician:

326 Bollay Drive,

Goleta, CA 93117

1-877-4-INOGEN (Toll Free)

1-877-446-6436 (Toll Free)

1-805-562-0515 (International)

info@inogen.net

www.inogen.com

PMS 661 main color/651 swish

Connect the AC power supply cord

to the Inogen One® G3 and plug the

power supply AC cord into an electrical

outlet. Do Not Power ON the Inogen

One® G3 concentrator.

96-03989-00-01B

Column Change Procedure

Table of Contents

Do you have a question about the One G3 and is the answer not in the manual?

Page 1 Connect the AC power supply cord to the Inogen One® G3 and plug the power supply AC cord into an electrical outlet. Do Not Power ON the Inogen Column Change Procedure One® G3 concentrator. Press and hold the light button for 10 seconds and screen will display “sieve reset”.
Page 2 Remove the battery from the Inogen One® G3 concentrator. To change the columns on your Inogen One G3, first: Turn the Inogen One® G3 over so that is standing Turn off the Inogen One® G3 concentrator by pressing the in the upside down position where the display power button to shut down the device.