Wireless Clients - TP-Link TL-WPA8630P User Manual

Hide thumbs Also See for TL-WPA8630P:

User manual (42 pages)

Manual (2 pages)

Quick installation manual (2 pages)

Table Of Contents

Table of Contents

Chapter 3

Security:

Select an option from the Security drop-down list. The extender provides

four options, None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP.

WPA2 uses the newest standard and the security level is the highest. We recommend

you don't change the default settings unless necessary.

Mode:

Select the desired mode.

• 802.11n only: Select only if all of your wireless clients are 802.11n devices.

• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.

• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless

clients.

Note: When 802.11n only mode is selected, only 802.11n wireless clients can connect to the extender. It is strongly

recommended that you select 802.11b/g/n mixed, and all of 802.11b, 802.11g, and 802.11n wireless clients can

connect to the extender.

• 802.11ac only (5GHz): Select only if all of your wireless clients are 802.11ac devices.

• 802.11n/ac mixed (5Ghz): Select if you are using both 802.11n and 802.11ac wireless

clients.

• 802.11a/n/ac mixed (5Ghz): Select if you are using a mix of 802.11ac, 802.11n and

802.11ac wireless clients. It is strongly recommended that you select 11a/n/ac mixed.

Channel Width:

Select the channel width from the drop-down list. The default setting is

automatic, which can adjust the channel width for your clients automatically.

Channel:

Select the channel you want to use from the drop-down list. This field

determines which operating frequency will be used. It is not necessary to change the

wireless channel unless you notice interference problems with another nearby access

point.

Transmit Power:

Select the level of transmit power. We recommend you choose

have the best signal strength.

3 5 2