TP-Link TL-WPA8630P User Manual page 13

Chapter 2
2 Join the new powerline extender into the existing powerline
network by Pairing two powerline devices.
a . Press the Pair button on the existing powerline extender
for 1 second. The Power LED starts blinking.
Note: If the Power LED does not blink, press again.
b . Within two minutes, press the Pair button on the new
powerline extender for 1 second. The Power LED starts
blinking. When the Powerline LED stays on, the pairing
process is done!
3 Relocate the new powerline extender to where Wi-Fi is
preferred.
Note: A red Powerline LED indicates poor signal strength, we recommend
another location.
Existing Powerline Extender
Powerline
Existing Powerline Extender
Powerline
Initial Use
New Powerline Extender
New Powerline Extender
10