TP-Link TL-WPA8630P User Manual page 21

Chapter 3
To enable or disable the wireless function:
Click 2.4GHz or 5GHz, then enable the wireless radio of this band. Deselect the box to
disable wireless function. If disabled, all wireless settings of the corresponding band
will be ineffective.
To change the wireless network name (SSID) and wireless password:
The default SSID is TP-LINK_XXXX for 2.4GHz network and TP-LINK_XXXX_5G for 5GHz
network, and the default password is 12345670. You can change the default ones by
directly entering new ones in the field. SSID is up to 32 characters, and the value in both
SSID and password is case-sensitive.
Note:
Remember to write down the new SSID and password, for you may be disconnected when new settings are effective.
To hide SSID:
Select Hide SSID, and your SSID will not broadcast. It won't display when you scan for
local wireless network list on your wireless device and you need to manually join the
network.
To have more advanced settings
Click Advanced below Password to have more advanced settings.
Configuring via Web Management Interface
18