Eko Warrior ks50-dc Installation And Operating Instructions Manual page 52

ROOM TIME 1. [2] ON
disappearing. If this function has been selected the heat pump will start at the time of your choosing and
automatically switch off, again at your chosen time.
If you wish to set the time to a different one than that shown, move the cursor DOWN one item to the
time setting and press RIGHT or left to increase or decrease the time setting respectively.
ROOM TIME 1. [2] OFF
ON time.
If you wish to set the time to a different one than that shown, move the cursor DOWN one item to the
time setting and press RIGHT or left to increase or decrease the time settings respectively.
WARMWATER 1. [2] ON
Two heating periods can be set.
The WARMWATER settings do not control the heat pump itself but control the production of hot water.
The setting for the production of hot water will prevent heating of the radiator system until one of two
water production has been switched off automatically at the set time.
disappearing. If this function has been selected the heat pump will produce hot water for the hot water tank.
It will automatically stop producing hot water, again at your chosen time.
If you wish to set the time to a different one than that shown, move the cursor DOWN one item to the
time setting and press RIGHT or left to increase or decrease the time setting respectively.
WARMWATER 1. [2] OFF
ON time.
If you wish to set the time to a different one than that shown, move the cursor DOWN one item to the
time setting and press RIGHT or left to increase or decrease the time settings respectively.
NB:
example below for ROOM TIME settings, otherwise radiator heating will not operate as intended.
51