Eko Warrior ks50-dc Installation And Operating Instructions Manual page 44

CURVE
This menu item allows the heat curve to be adjusted by the CURVE value. This value controls the feed line
of CURVE changes.
For long term settings, the CURVE value should be adjusted as this is the most energy and cost efficient way
to set the indoor temperature.
Changing Curve Value
CURVE
6
4
56
48
40
32
24
15 5 0
Outside air temperature
This is the most energy and cost efficient way to set the indoor temperature and should therefore be used
for long term temperature settings.
MIN
This item allows the value to be adjusted for the lowest feed water temperature allowed.
MAX
This item allows the value to be adjusted for the highest feed water temperature allowed.
CURVE ROOM
DOWN so that the desired room temperature is reached.
43
40º 18
ºC
-5