Timesetting - Eko Warrior ks50-dc Installation And Operating Instructions Manual

7: TIME SETTING SUBMENU
1. Open the INFORMATION main menu by pressing RIGHT once.
2. Open the TIMESETTING submenu by pressing RIGHT once after you have moved the cursor to this item.
4. Select the desired menu item by pressing either UP or DOWN.
TIME SETTING
TIME
ROOM TIME 1 ON
ROOM TIME 1 OFF
The full menu can be scrolled through by means of UP and DOWN. The
screen is available below the current one and the
the current one.
Use UP and DOWN to select each item.
DATE
Displays year, month, day. Use RIGHT to move from year to month to day and LEFT to go back if required,
changing the values as necessary if the date is incorrect.
DAY
Displays the day of the week. This will automatically be set, depending on the date setting.
TIME
Displays the time and allows adjustments to be made. Use RIGHT to move from hour to minute and LEFT
to go back if required, changing the values as necessary if the time is incorrect.
ROOM TIME 1/2 ON/OFF
These four settings enable two distinct time periods to be selected during the day. The settings are paired, i.e.
setting ROOM TIME 1 ON will set ROOM TIME 1 OFF automatically and setting ROOM TIME 2 ON will set
ROOM TIME 2 OFF automatically, i.e. the OFF settings cannot be made independently of the ON settings.
When the heat pump is ON the WARMWATER timer function makes sure hot water production has
priority.
ROOM TIME 2 ON
ROOM TIME 2 OFF
15:04
WARMWATER 1 ON
8:00
WARMWATER 1 OFF
11:00
symbol indicates that a further screen is available above
WARMWATER 2 ON
14;25
WARMWATER 2 OFF
21.10
ADD TIME ON
10:00
ADD TIME OFF
12:00
symbol indicates a further
15:00
22.00
00:00
00:00
50