Table of Contents
Advertisement
MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the Remote Control Unit is lost or otherwise unavailable.
REMOTE CONTROL UNIT UNAVAILABLE (MANUAL AUTO OPERATION)
If the Remote Control Unit is lost or the batteries are dead, the air conditioner can be operated provisionally from the indoor
unit.
1. Open the front panel.
Grab both sides of the front panel and open the front
panel until it is held in place. (The panel will remain open
even after it is released.)
2. Press the MAINTENANCE/MANUAL AUTO
button for 3 seconds.
G Press the MAINTENANCE/MANUAL AUTO button and
continue to press the button even after a beeping sound
is produced.
The OPERATION Indicator Lamp (red) on the Indoor Unit
will light.
The air conditioner will operate in the auto mode (see
page 17). Airflow will be automatic, airflow direction will
be the standard setting, and the thermostat settings will
be the standard temperature.
Stopping MANUAL AUTO Operation
Press the MAINTENANCE/MANUAL AUTO button for 3 seconds.
Air conditioner operation will stop and the OPERATION Indicator Lamp (red) on the Indoor Unit will go out.
En-15
9312556014-En.pm6.5
15
3. Close the front panel.
G Do not operate the air contidioner with the front panel
open.
2003.6.11, 5:08 PM
Hide quick links:
Advertisement
Table of Contents
