Hobby optima Manual page 105

07-21 Electrical Installations
Rules for the mains connection
• Use only a 3 x 2.5 mm
a CEE plug and connector to connect the motor home to an
external 230 V mains.
• After the mains connection has been plugged in, both the
modular and the vehicle battery will automatically be char-
ged by the battery charger in the motor home (even if the
Control Panel has not been switched on).
When obtaining electricity via a cable drum, this must be
completely unwound, as otherwise induction may cause
the cable to heat up, which could lead to burning.
(Provided there is no protection against overheating)
• The 230 V mains connection in the motor home has been
designed for a total power consumption of 3000 W. If addi-
tional devices requiring electricity are connected, such as a
water heater, etc., you must ensure that this electric power
value is not exceeded, taking other electrical equipment in
use, such as the refrigerator, heating, etc., into account.
cable with a maximum length of 25 m,
2
2
1
Residual current device
The standard version of your vehicle is equipped with a
residual current device that will interrupt the electric circuit in
case of a possible residual current. Should there be a mal-
function, the passenger circuit breaker opens the entire
230 V circuit.
Repairs must not be carried out on the residual current
device.
A residual current device does not guarantee any protec-
tion against the danger from an electric shock. It does
not protect against possible electrical accidents.