Ancillary battery
These menus show
- the charging voltage (U)
- the charging current (I)
- the remaining time until discharge, dependent on the cap
city and the actual flow (current)
- as well as the charging status of the batteries (1/2 or 2/3).
Starter battery
Setting the battery type
The type and capacity of the battery have been set by the
manufacturer. If the type of battery is changed, these settings
must be adjusted accordingly.
To reach this part of the menu, go to the "Loading the Batte-
ry" menu and press the button for approx. 2 seconds.
Electrical Installations
07-10