Hobby optima Manual page 145

Built-in devices
10-7
d
BOOST
1)
Can lead to higher engine wear, depending on how often it
is selected.
2)
The "HIGH" fan speed has a higher current consumption,
higher noise level and higher engine wear.
As soon as the heating has been switched on (room tempe-
rature and hot water temperature have been activated) the
fan speed selected in the previous heating operation is
displayed in the status line. Manufacturer's default setting:
"ECO".
To heat room rapidly
Available if the difference between the
selected and the actual room tempera-
ture is more than 10°C.
Setting the timer
The timer can only be selected if the clock on the control panel
has been set.
If the timer has been activated (ON), the menu item Activate timer
(OFF) is first displayed.
Use the adjusting knob / pushbutton to select the icon in the
menu line .
m
- Press to switch to the setting mode.
Entering the start time
Entering the end time
- Use the adjusting knob / pushbut-
ton to set the hours and then the
minutes.
- Use the adjusting knob / pushbut-
ton to set the hours and then the
minutes.