Troubleshooting; Disposal - Silvercrest SKT 2000 A1 Operating Instructions Manual

RP77967 Konvektor-Timer LB7 Seite 10 Donnerstag, 26. Juli 2012 3:27 15
Fault
Appliance cannot be Faulty fuse or wall socket
switched on
Faulty appliance
Appliance switches Thermal cut-out has
off automatically triggered
Only cold air is pro- Selected temperature has
duced been reached
9.1 Appliance
The symbol with the crossed-
out rubbish bin on wheels
means that within the European
Union, the product must be
disposed of to a sorted rubbish
collection. This applies to the
product and all accessories which are
marked with this symbol. Marked products
must not be disposed of via the regular
domestic waste but must be handed in to a
recycling centre for electrical or electronic
devices. Recycling helps to reduce the use of
raw materials and
environment. It is therefore imperative that
you follow the

disposal

applicable in your country.
10
8.

Troubleshooting

Cause
9. Disposal
9.2 Packaging
If you would like to dispose of the
packaging,
corresponding environmental regulations in
your country.
to relieve the
regulations
Remedy
Select another wall socket
Have repairs carried out at a specialist
workshop or dispose of the appliance.
You will find the service address in
"Service Centre" on page 12.
Allow the appliance to cool down (see
"6.6 Thermal cut-out" on page 8)
Clean the appliance (see
"7. Cleaning" on page 9)
Heating switches on again automati-
cally as soon as the room temperature
falls
Select a higher required temperature
please observe the