Troubleshooting; Disposal - Silvercrest SKHD 1800 A1 Operating Instructions Manual

Bedienung GB Seite 30 Mittwoch, 2. Mai 2012 12:36 12
Fault
Appliance cannot be Faulty fuse or wall socket
switched on
Faulty appliance
Appliance switches Safety switch has triggered
off automatically
Thermal cut-out has
triggered
Only cold air is pro- Selected temperature has
duced been reached
9.1 Appliance
The symbol with the crossed-
out rubbish bin on wheels
means that within the European
Union, the product must be dis-
posed of to a sorted rubbish
collection. This applies to the
product and all accessories which are mar-
ked with this symbol. Marked products must
not be disposed of via the regular domestic
waste but must be handed in to a recycling
centre for electrical or electronic devices.
Recycling helps to reduce the use of raw
materials and to relieve the environment. It is
30

8. Troubleshooting

Cause
Select another wall socket
Have repairs carried out at a specialist
workshop or dispose of the appliance.
You will find the service address in
„10. HOYER Handel GmbH Warranty"
auf Seite 31.
Set the appliance upright (siehe
„7.6 Safety switch" auf Seite 29)
Allow the appliance to cool down
(siehe „7.5 Thermal cut-out" auf
Seite 29)
Clean the appliance (siehe
„6. Cleaning" auf Seite 27)
Appliance switches on again automati-
cally as soon as the room temperature
falls
Select a higher desired temperature

9. Disposal

therefore imperative that you follow the dis-
posal regulations applicable in your country.
9.2 Packaging
If you would like to dispose of the
packaging, please observe the correspon-
ding environmental regulations in your
country.
Remedy