Maintenance; Empty The Dust Cup; Clean The Filters - Shark NV750 Series Owner's Manual

MAINTENANCE

WARNING: Always ensure the power is OFF ("O" position) and unplugged before cleaning your vacuum.

EMPTY THE DUST CUP

1 Pull up on the dust cup release latch and lift the dustcup off the pod.
2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch.
3 Press the top dust cup release latch to access the dust screen and remove built-up debris as required.

CLEAN THE FILTERS

See cleaning schedule on page 2
4
With the dust cup detached, remove and rinse the foam and felt filters every 3 months. Hand wash only. Let air dry completely before re-inserting. Tap loose dirt off
filters between washes as needed.
5 Once a year, open the filter grill to remove and rinse the HEPA filter. Hand wash only. Let air dry completely before replacing.
1
1 2
3
2
w w w . s h a r k n i n j a m a n u a l s . c o m
FOAM FILTER
FILTER FRAME
4
FELT FILTER
HEPA
5