Preparations - Carson Airbeast II Pro Instruction Manual

g. Preparations
GB
General remarks
• If you have no or little experience with airplane models, you should
first practice with a flight simulation program.
• Seek advice from an experienced R/C user for the first few attempts.
• Acquaint yourself with the control functions of the transmitter.
• Begin your flight experiments standing behind the model, the line
of sight in the flight direction. In this case, the control reaction is the
same as the direction of control.
Furthermore acquaint yourself with the control of the model as it
comes towards you (side-inverted reaction to the direction of control)!
Install flight battery
Insert the battery into the battery compartment.
36 CARSON Helicopter Airbeast II Pro
Charging and installation of the airplane
batteries
Always charge the battery outside of the model!
• Connect the battery charger with the battery adapter.
• Plug the plug battery charger in a power socket.
• Connect the battery with the LiPo Balance Charger.
• Make sure that the connector is inserted correctly to avoid a short
circuit.
• Do not cover the battery!
• Connect the LiPo Balance Charger to the power supply's cable.
• Connect the LiPo battery's white balance connector to the LiPo
LiPo Balance
Balance Charger.
Charger
• The battery is completely charged when 2 leds light up.