Carson Airbeast II Pro Instruction Manual page 33

Synchronisation
button
Transmitter switched on
4. Using the 2.4 GHz
1. All plugs must be connected to the correct slots.
2. Switch the ON/OFF switch on the transmitter to ON.
3. Connect the accumulator cable to the receiver power cable.
4. The receiver's LED glows continuously.
5. That's it – you're ready for take off!!!!!!
Illustration 2
ON/OFF
Illustration 1
Receiver
switched on
CARSON Helicopter Airbeast II Pro
Illustration 3
Receiver switched off
33
GB