Preparations - Carson Agusta Westland Grand Instruction Manual

f. Preparations
General remarks
• If you have no or little experience with airplane models, you should
first practice with a flight simulation program.
• Seek advice from an experienced R/C user for the fine adjustments
and the control of the helicopter.
GB
• Acquaint yourself with the control functions of the transmitter.
• Begin your flight experiments standing behind the model, the line
of sight in the flight direction. In this case, the control reaction is
the same as the direction of control.
Furthermore acquaint yourself with the control of the model as it
comes towards you (side-inverted reaction to the direction of control)!
LiPo Balance Charger
Install flight battery
1. Open the battery compartment lid.
2. Insert the battery into the battery compartment.
3. Leave the connecting lead hanging out and then replace the lid on
the battery compartment.
32 CARSON Helicopter Agusta Westland Grand
Charging and installation of the airplane
batteries
Always remove the battery from the model before charging and
charge on a fireproof base.
1. Connect the LiPo battery charger with the battery adapter.
2. Plug the plug battery charger in a power socket.
3. Connect the white connector plug of the LiPo battery with the jack
of the LiPo battery charger.
4. Make sure that the connector is inserted correctly to avoid a short
circuit.
5. Do not cover the battery.
The temperature of the battery should not exceed 60°C during the
charging process.
The charging procedure is complete when the green LED on the
balance charger lights up.