Vf Menu - Sony PMW-F55 Operating Instructions Manual

Video
Menu items Sub items and setting values Contents
Output Display
VF Out
Setting for the
output signal
4K SDI/HDMI Out (PMW-F55
only)
HD SDI (Sub) Out
HD/SD HDMI Out

VF Menu

When there is SW or VR for an item on the attached viewfinder, that item is not available.
VF
Menu items Sub items and setting values Contents
VF Setting Color
Setting the
viewfinder
Contrast
Brightness
Color Mode
Aspect
Peaking Setting
Setting the peaking
function
Peaking Type
Frequency
Normal Peaking Level
Color
Color Peaking Level
56 Setup Menu List
On / Off
On / Off
On / Off
On / Off
–99 to +99 (±0)
–99 to +99 (±0)
–99 to +99 (±0)
Color / B&W
Auto / Full / Anamo ×1.3 /
Anamo ×2
On / Off
Normal / Color
Normal / High
0 to 99 (50)
White / Red / Yellow / Blue
0 to 99 (50)
Selects whether to overlaps characters and markers on the
viewfinder output signal.
Selects whether to overlaps characters and markers on the
SDI or HDMI output signal when the picture size of SDI or
HDMI output is 4K.
Selects whether to overlaps characters and markers on the
SDI (Sub) output signal when the SDI (Sub) output picture
quality is less than HD.
Selects whether to overlaps characters and markers on the
HDMI output signal when the HDMI output picture quality is
less than HD.
Adjusts the color of pictures on the viewfinder.
Adjusts the contrast of pictures on the viewfinder.
Adjusts the brightness of pictures on the viewfinder.
Selects the display mode of the viewfinder while E-E display/
recording.
Selects the displayed area of pictures for the viewfinder.
Anamo ×1.3 / Anamo ×2: Corrects the distortion of the
images on the viewfinder screen when using an anamorphic
lens. (This setting is available only when "Main Operation" in
"Base Setting" of the System menu is set to "RAW.")
Turns the peaking function on/off.
Selects the peaking type.
Normal: Normal peaking.
Color: Color peaking.
Selects the peaking frequency from "Normal" (normal
frequency) or "High" (high frequency).
Sets the normal peaking level.
Selects the color of the peaking signal when "Peaking Type"
is set to "Color."
Sets the color peaking level.