Table of Contents
Advertisement
9. Use a hobby knife to cut out the engine cylinder
exit opening as shown.
10. Check the fit of the template at this time. It may
be necessary to make small adjustments to the
cutout to get it to fit properly.
11. Using cowl mounting bolts align template with
bottom of cowl. Use a felt tip marker to transfer
the template cutout pattern to the cowl and mark
cut location.
Note: Pay close attention to the marker you
choose. Some permanent markers may not
be easily removed. Also, When using
rubbing alcohols or other paint removers,
always test on painted parts before using!
12. Remove the template and use a rotary cutting
tool and sanding drum to cut out the openings in
the cowl.
Note:
Take care not to cut or scratch the
cowl.
70
Hide quick links:
Advertisement
Table of Contents
