Logik LMF65SSTDN User Manual page 15

MSF60SS-MSS60WH-Oven guide D3.qxd
installation instructions
2 Once the oven has been positioned into the gap, the front frame of the oven can
be fixed to the surrounding kitchen unit using the mounting screws and secured into
place with the spacers. (refer to detail B).
Making an electrical connection
An approved suitable cable must be connected from the Consumer Unit (main fuse box)
and be protected by its own 30amp fuse or Micro Circuit Breaker (MCB).
The electrician must provide a fused double-pole isolation switch, which disconnects
both the line (live) and neutral conductors, with a contact seperation of at least 3 mm.
The fused switch should be fitted to the kitchen wall, and must be placed in an easy
accessible position in accordance with IEE regulations. Connect the fused switch to a
junction box which should be fitted on the wall. The ovens power supply cable can then
be connected. Connect one end to the junction box and connect the other end to the
ovens power connection box which is located at the back of the oven. Remove the
cover of the power connection box and install the cable, in accordance with the
connection diagram. The power supply cable must be postioned away from direct heat
sources. It should not be subjected to a temperaturerise of more than 50ºC above
14
23/5/06 17:26
B
Page 14
Kitchen unit
DETAIL B