Reset To Factory Defaults; End Of Transmission Tone; Tone) - Motorola XTNI Non-display Model User Manual

seconds while powering up the radio until you
hear a quick series of beeps. To have a slightly
better attack time, set Battery Save feature to
OFF so that the radio is always ready to
transmit or receive without any delays.
Note: Battery Save feature is set to ON by default

Reset To Factory Defaults

Reset To Factory Defaults will set back all
radio features to the original factory default
English
settings. To do so press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp beep.
End of Transmission Tone (Roger Beep

Tone)

Short press the SB1 button while turning ON
the radio to enable/disable End of
Transmission Tone.
Note: By default, this feature is OFF.
30
English