Charging A High Capacity Battery - Motorola XTNI Non-display Model User Manual

Charging a High Capacity Battery

To convert the charger from the default
setup to accommodate the high capacity:
1. Squeeze both tabs on each side of the
removable bracket in the drop-in charger tray
carefully and lift the bracket from the charger
tray.
2. Rotate the removable bracket 180 degrees and
replace it by fitting it in the charger slot until it
clicks. The label on the removable bracket should
show 'High & Ultra Capacity Battery' facing front
of the charger.
20
English
Removable
Piece
Removable
Piece
Turn around
horizontal
180 degree
3. Repeat same procedure to return position back to
charging a Standard Battery. Label on the
removable bracket should show 'Standard
Battery' facing front.
Note: Make sure the bracket is assembled
correctly for both standalone battery and
battery (with radio) to be properly charged.