Charging A Radio And Battery Using A Multi; Unit Charger-Muc (Optional Accessory) - Motorola XTNI Non-display Model User Manual

Charging a Radio and Battery Using a Multi-

Unit Charger-MUC (Optional Accessory)

The Multi-Unit Charger (MUC) allows drop-in
charging of up to 6 radios or batteries.
Batteries can be charged with the radios or
removed and placed in the MUC separately.
Each of the 6 charging pockets can hold a
radio or battery, but not both.
1. Place the charger on a flat surface.
2. Insert the power cord plug into the jack on the
MUC.
3. Plug the cord into an AC outlet.
4. Turn the radio OFF.
5. Set removable bracket for battery type.
6. Insert the radio or battery into the charging
pocket.
Notes:
• This Multi-Unit Charger will also allow you to clone
up to 3 radios (3 Source radios and 3 Target
radios).
• When cloning, the MUC does not need to be
plugged into a power source, but all radios require
charged batteries. Further details on MUC's
operation are explained in the Instructions Sheet
provided with the MUC. Refer to the "Accessories"
section to identify the part number for ordering the
MUC.
MUC LED Indicator
Status LED Status
Steady Red
Charging
Indication
Charge Steady Green
Complete Indication
Battery Fault Red Fast
(*) blinking
(*) Normally re-seating the battery pack will correct this
issue.
Comments
The charger is
currently charging
Battery is fully
charged
Battery had a fault
when battery was
inserted
23
English