Table of Contents
Advertisement
HANDS-FREE USE/VOX
Motorola XTNi™ radios can operate hands-
free (VOX) when used with compatible VOX
accessories. A short delay occurs between
talking and the radio transmission.
With Compatible VOX Accessories
The default factory setting for VOX sensitivity
level is OFF (level '0'). Before using VOX,
28
English
usethe CPS (Computer Programming
Software) to make sure the VOX level is set to
a level different from "0". Then, perform the
following steps:
1.
Turn radio OFF.
2.
Open accessory cover.
3.
Insert plug of audio accessory firmly into
accessory port.
4.
Turn radio ON. Radio LED will blink double red
5.
Lower radio volume BEFORE placing
English
accessory near ear.
6.
To transmit, speak into accessory microphone
and to receive, stop talking.
7.
VOX can be temporarily disabled by pressing
the PTT button or by removing the audio
accessory.
Note: To order accessories, contact your Motorola
dealer.
Advertisement
Table of Contents
